WarezHero

Facilities and software features of Cadence SPB OrCAD:
- suitable graphical user environments and display circuit using icons
- OrCAD Capture and Capture CIS schematic design circuits in powerful environment
- Ability to design PCB (Printed Circuit Board stands and means the board or PCB)
- has an extensive library full of components and electronic devices
- Advanced simulation and analysis electronic circuits in a graphical environment PSpice
- environment Orcad PCB Designer / Editor to design and edit PCB
- Ability to interact with MATLAB and Simulink software

System Requirements:
OS:Windows 10 (64-bit) Professional, including Dark Theme mode; Windows Server 2012 (All Service Packs); Windows Server 2012 R2; Windows Server 2016.
CPU: Intel® Core™ i7 4.30 GHz or AMD Ryzen™ 7 4.30 GHz with at least 4 cores
Memory: 16 GB RAM
Space: 50 GB free disk space (SSD drive is recommended)
Display: 1920 x 1200 display resolution with true color (at least 32bit color)
GPU: A dedicated graphics card supporting OpenGL, minimum 2GB (with additional support for DX11 for 3D Canvas)
Monitors: Dual monitors (For physical design)
Supported MATLAB Version: R2019A-64Bit (For the PSpice-MATLAB interface)

WHATS NEW:
Cadence SPB Allegro and OrCAD v17.40.001-2019 Hotfix Only Release Notes:
-ADW DBEDITOR 'BOTH' in ALT_SYMBOLS prevents correct generation of part_table.ptf
-ADW FLOW_MGR EDM Flow Manager crashes on opening TDO-enabled projects on some versions of Linux
-ALLEGRO_EDITOR COLOR Add option under View menu for 'load color view'
-ALLEGRO_EDITOR COLOR Add menu option for the 'colorview load' command
-ALLEGRO_EDITOR DATABASE For multi-zone flex board with one and two layers, drill legend for mechanical hole not created in one-layer zone
-ALLEGRO_EDITOR DFM DFF Copper Spacing - Trace to Thru via hole false error, typically on arc segments
-ALLEGRO_EDITOR DFM DFF CF sliver violation not detected when shape formed is too narrow
-ALLEGRO_EDITOR DFM PCB Editor crashes on moving line in board file
-ALLEGRO_EDITOR DRAFTING The diameter symbol is in front of the measurements instead of being behind
-ALLEGRO_EDITOR DRC_CONSTR Crash during DRC: DBDoctor exits with error 'Illegal database pointer encountered'
-ALLEGRO_EDITOR DRC_CONSTR Via at SMD fit DRC not detected with rounded rectangle pads
-ALLEGRO_EDITOR EDIT_ETCH When routing to an unused suppressed via padstack, PCB Editor is not following the cline to drill constraint value
-ALLEGRO_EDITOR EDIT_ETCH Crash on editing board file
-ALLEGRO_EDITOR EDIT_ETCH Unable to route with Hug or Shove selected as Bubble type and unused pad suppression enabled
-ALLEGRO_EDITOR EDIT_ETCH incremental move using ix for sliding via slides via in y direction as well for Pre-select operation
-ALLEGRO_EDITOR INTERACTIV Using axlAirGap(),testing with a NPTH padstack which has no pad, the coordinates are swapped in return value.
-ALLEGRO_EDITOR INTERACTIV Inconsistencies while defining and adding properties to text objects
-ALLEGRO_EDITOR INTERACTIV OrCAD PCB Design crashes when modifying Outline Vertex
-ALLEGRO_EDITOR MULTI_USER Allegro Symphony is slow
-ALLEGRO_EDITOR OTHER Show measure returns a large value for Airgap when measuring gap between a pin with null pad and another pin
-ALLEGRO_EDITOR SCHEM_FTB Import netlist directory path is not saved
-ALLEGRO_EDITOR SCHEM_FTB Import netlist does not remember the last/latest import directory path
-ALLEGRO_EDITOR SCHEM_FTB The Import Logic form is not able to remember the Import Directory path in release 17.2-2016, HotFix 059
-ALLEGRO_EDITOR SCHEM_FTB Import Logic/ Netlist does not remember import directory path in release 17.2-2016, HotFix 059
-ALLEGRO_EDITOR SCHEM_FTB Import Netlist directory is not saving in design.
-ALLEGRO_EDITOR SCHEM_FTB Import Logic does not remember import directory
-ALLEGRO_EDITOR SCHEM_FTB Path set in 'Import directory' while performing 'File' - 'Import' -'Logic/Netlist' is not remembered
-ALLEGRO_EDITOR SCHEM_FTB Import Netlist does not remember the last 'Import directory' path
-ALLEGRO_EDITOR SCHEM_FTB 'File' - Import Logic/Netlist' does not remember the last 'Import directory' value
-ALLEGRO_EDITOR SHAPE Same net shape to hole spacing is only detecting DRC and not voiding shape
-ALLEGRO_EDITOR SHAPE Tapered Trace - 'Desired Angle' reset to default value (60)
-ALLEGRO_EDITOR SHAPE Tapered shape - 'Desired Angle' reset to 60
-ALLEGRO_EDITOR SHAPE Edit Shape Vertex slow to respond when degas holes are present
-ALLEGRO_EDITOR SHAPE Tapered trace angle does not work
-ALLEGRO_EDITOR SHAPE Taper trace does not keep the desired angle when form is closed
-ALLEGRO_EDITOR STEP Update STEP Mapping Data Only should be a separate menu/command
-ALLEGRO_EDITOR UI_FORMS The new browse window from Netlist Import fills in a name in the directory field
-ALLEGRO_EDITOR UI_GENERAL Setup > Outlines>Design Outline should have Apply disabled in Edit mode
-ALLEGRO_EDITOR UI_GENERAL Changes made in Visibility tab are lost
-ALLEGRO_EDITOR UI_GENERAL Menu displays garbled text when customized for Chinese in release 17.2-2016
-ALLEGRO_EDITOR UI_GENERAL Incorrect datatip display for pin without pin number
-ALLEGRO_PROD_TOOLB CORE Panelization with the Productivity Toolbox is deleting design outline
-APD EDIT_ETCH Hug broken in slide command
-APD SHAPE Dynamic shape not voiding consistently
-APD UI_GENERAL 'Help' - 'About' shows wrong design application name
-ASI_SI GUI PCBSI Report file export fails on Linux
-CONCEPT_HDL CORE Wire > NetGroup > Edit... crashes DE-HDL
-CONCEPT_HDL CORE DE-HDL crashes on saving hierarchy for large designs
-CONSTRAINT_MGR SCM Clicking Resolve in the 'Alias Property Conflict Report' does not perform any action
-CONSTRAINT_MGR UI_FORMS Enabling Directly-Set filter in Physical or Spacing CSet worksheet crashes PCB Editor
-F2B BOM BOM-HDL .rpt file does not adhere to settings defined
-F2B BOM Unable to create comma separated BOM Report
-PCB_LIBRARIAN SYMBOL_EDITOR System Capture: Filled dots are shown as circles
-PSPICE AA_FLOW Distribution defined in DIST property on part is not honored
-PSPICE AA_MC PSpice AA MC log file is not showing error if distribution is not defined
-PSPICE AA_MC Distribution cannot be defined at the global level in assign tolerance GUI
-PSPICE AA_MC PSpice Advanced Analysis MC - distribution in global tolerance window does not work
-PULSE R2PLM Second publish with CPM-derived item number and cadName set to $NUMBER causes 'an item is not unique' error
-SIP_LAYOUT DATABASE Results are not consistent on turning on/off the pins/vias in the Color Dialog box using the Visibility tab
-SIP_LAYOUT UI_GENERAL Capture Canvas Image will not save in .jpg format, only saves in .BMP format.
-SIP_LAYOUT UI_GENERAL Generic: File browser does not append selected file extension if none provided, always uses original
-SYSTEM_CAPTURE DARK_THEME create variant form has dark blue on dark black background.. can't read it
-SYSTEM_CAPTURE MISCELLANEOUS Custom forms do not appear in the proper size within the tool
-SYSTEM_CAPTURE NEW_PROJECT Unable to place special symbols.
-SYSTEM_CAPTURE SELECTION_FIL Discrepancy in the total number of objects reported in the Selection Filter
-TOPXP GUI topxp doesn't give warning/error when ngnd is not connected
-TOPXP GUI lost s-param checking functions for wrapped s-param model in spice block
-TOPXP GUI Need to have the option for DC level shift as default
-TOPXP PARALLELBUS_A Circuit/channel sim correlation does not produce output
-TOPXP PARALLELBUS_A SystemSI does not allow simulations beyond 1000 bits when Spectre is used

SCREENSHOTS




HOMEPAGE

https://www.cadence.com/content/cadence-www/global/en_US/home.html

Теги: Cadence